CAMWorks ShopFloor 2021 Plus SP1 (x64)

* Turning single- and double-spindle, with one or two calipers, with software-controlled auxiliary mechanisms (tailstock, lunettes, catchers of parts ...);
* Turning and milling one- and two-spindle, with one or two calipers, with programmable auxiliary mechanisms, with simultaneous control of two to five axes;
* Erosional two- and four-axis.

Processing is carried out directly in the SolidWorks environment and directly on the SolidWorks model. The results of the programmer's work are saved in the same model of the SolidWorks part or assembly. This ensures complete associativity of the model and tool paths, which leads to an automatic update of all tool paths when making changes to the model. When adding any technological data to the SolidWorks model, such as roughness designations, datums, tolerances of the shape and location of surfaces, dimensional tolerances, the technologist-programmer always has direct access to them, which makes it easier to select the layout of the part on the machine and the selection of the necessary ensuring the specified quality of the tool part and cutting conditions. The part can be easily adapted to the machining needs by, for example, elimination of geometry elements that are superfluous from the point of view of processing or by recalculating the executive dimensions of the model in the middle of the tolerance field. In the SolidWorks assembly mode, you can perform joint processing of several parts, program the processing of a series of parts, or simply completely simulate the entire real situation on the machine table - all tooling, workpiece of any complexity, and so on - for the most complete consideration of the realities of processing already at the earliest stages creating a program

What's New:
official site does not provide any info about changes in this version.
Homepage

https://camworks.com/

CAMWorks ShopFloor 2021 Plus SP1 (x64) Fast Download
CAMWorks ShopFloor 2021 Plus SP1 (x64) Full Download