Graphics & Design :

Autodesk Powermill 2022.0.3

      Author: Baturi   |   09 September 2021   |   comments: 0



Autodesk Powermill 2022.0.3
Autodesk Powermill 2022.0.3 | 1.9 Gb
Languages Supported: 中文 Simplified, 中文 Traditional, Čeština, english, Français, Deutsch, Magyar,
Italiano, 日本語, 한국어, Polski, Português, Русский, Slovenčina, Español, Türkçe
Product:Autodesk PowerMill
Version:2022.0.3 Ultimate *
Supported Architectures:x64
Website Home Page :www.autodesk.com
Languages Supported:multilanguage
System Requirements:PC **
Size:1.9 Gb



The Autodesk NC CAM team has launched the new release PowerMill 2022.0.3. This update includes a healthy mix of fixes, improvements, and new capabilities aimed at simplifying the daily life of CAM programmers around the world.
Toolpaths
- A problem has been fixed that caused PowerMill to close unexpectedly when calculating a toolpath with respect to a Contact Point boundary that ran along the edge of a cylindrical block. PMILL-16337
General
- A problem has been fixed that caused PowerMill to close unexpectedly when using setup stock in conjunction with a stock model. PMILL-14608
- Resolved an issue where the image on the Transform dialog was unexpectedly pink if the Hollow Box option was ticked. PMILL-11215
Customer error reporting (CER)
- A problem has been fixed that caused PowerMill to close unexpectedly when calculating the flat areas of the model. This issue was identified by CER. PMILL-16075, PMILL-16255, PMILL-16256, PMILL-16279, PMILL-16292
- A problem has been fixed that caused PowerMill to close unexpectedly when calculating a toolpath with respect to a boundary whose specified Limiting Boundary was empty. This issue was identified by CER. PMILL-9427
- A problem has been fixed that caused PowerMill to close unexpectedly when calculating a 3D Offset toolpath. This issue was identified by CER. PMILL-16060
- A problem has been fixed that caused PowerMill to close unexpectedly when calculating Corner Finishing toolpaths. This issue was identified by CER. PMILL-16448
PowerMill is Autodesk's CAM solutionfor high-speed and five-axis machining. It offers a comprehensive range of strategies and powerful editing tools to ensure efficient, safe and accurate machining, especially for companies that are using sophisticated CNC machine tools to produce complex shapes in challenging materials. PowerMill is used in a wide range of industries but is particularly successful in mold, tool and die, complex aerospace and automotive applications.
The 2022 release includes a healthy mix of fixes, improvements, and new capabilities aimed at simplifying the daily life of CAM programmers around the world.
The new features and enhancements added since PowerMill 2021.1.1.
Finishing Toolpaths now Exclude Flat Areas
PowerMill's most commonly used feature - finishing toolpaths (Steep & Shallow, Raster, and 3D Offset Finishing) has been improved to simplify the programming of parts containing flat/planar areas. PowerMill 2022 includes a new option to exclude flat areas during toolpath calculation. This small, but significant update means programmers no longer need to spend time creating separate boundaries to limit the machining. Instead, PowerMill simply calculates a toolpath with the flat areas removed - simple!

More Accurate Flat Finishing
In the previous PowerMill update, Autodesk discussed excluding flat areas from Steep & Shallow toolpaths - but these areas still need to be machined. In most cases, this is best achieved using a Flat Finishing toolpath (either Rasteror 3D Offset). And it is here, where we see the next improvement in PowerMill 2022 - namely improved toolpath accuracy. In previous releases of PowerMill, there were occasions where the toolpath could contain chamfers in internal corners. These small errors could result in material being left un-machined which would need to be removed later - either using additional toolpaths or by manual polishing. This latest release of PowerMill now produces more accurate toolpaths - reducing the risk of material being left un-machined and helping to avoid the need for manual polishing.

Constant Z With Undercuts
Some releases ago, PowerMill's Constant Z finishing toolpath type was updated to allow it to handle parts containing undercuts. In these cases, it was possible to machine the undercut either, a) using a lollipop or disk cutting tool (great if you only have a 3-axis machine tool), or b) by using PowerMill's automatic 5-axis collision avoidance.
When using the automatic collision avoidance option, there were, unfortunately, rare occasions when a toolpath would be processed that was either incomplete or fragmented. This could result in additional toolpaths being required or even parts needing additional, manual polishing. With this latest release of PowerMill 2022, toolpath quality is greatly improved - as we can see if we compare the processing of this simple lug on an oil and gas part. In this case, the part is being machined with a Constant Z toolpath with "Spiral" switched on and the automatic collision avoidance activated. Note how, in previous releases, the toolpath suffers from excessive fragmentation, whereas the toolpath produced by PowerMill 2022 is complete - containing a single, smooth toolpath segment.

4-Axis and Rotary with Automatic Collision Avoidance
Continuing the theme of automatic collision avoidance, this powerful option really has transformed 5-axis programming inside PowerMill. Customer feedback has been so positive that the development team decided to extend this same functionality to work with 4-axis and Rotary finishing toolpaths.
These toolpaths now include the option to define clearance values that will be used to tilt the 4th axis of the machine to avoid any collisions that might occur between the cutting tool assembly and the workpiece. In order to produce NC programs containing 4-axis motion only (for both cutting and non-cutting connection moves), it is also possible to define tool-axis limits that will constrain the toolpath. This ensures the resulting post-processed G-code file will only contain 4-axis commands - and not output any 5-axis movements that could cause the CNC machine tool any problems or trigger any alarms.

Projection Ranges
If you've ever used PowerMill's various projection toolpath types, the chances are you've experienced this problem first hand. You're trying to machine a particularly complex component and have decided to use Projection Finishing toolpath (either Curve Projection or Surface Projection) combined with a 3D surface that you produced using Autodesk Fusion 360 or Autodesk PowerShape. You've created a surface that will be used to control the shape and extent of machining - ensuring you cut the part exactly how you want. Unfortunately, when you calculate the toolpath, you see that it is machining up and onto the fixture that secures the part in place. Fortunately, you know that PowerMill can fix this by ignoring the fixture - so you simply re-calculate the toolpath - but this time remembering to tell PowerMill to ignore the fixture model. Great, that's simple, right?
The image below shows a typical example of a component being machined with Surface Projection finishing. Here we can see the reference surface (shaded in cream) and the resulting projection toolpath over-machining the fixture.

Now imagine if the projection toolpath wasn't just projecting onto the fixture, but was also projecting onto neighbouring parts of the model that you DO actually need to machine. You can't just tell PowerMill to ignore that surface - as it needs to be machined! So how can you create the right toolpath?
This is where Projection Ranges can help. As the name suggests, these options allow you to define the distance that the projection toolpath is allowed to project away from the reference surface being used. A new option in the toolpath settings menu allows you to define both minimum and maximum projection range distances (for Curve and/or Surface Projection Finishing toolpaths). These will then be used to control the extent of the toolpath and prevent it from projecting onto neighbouring faces of the part (or the surrounding fixture).

While Projection Ranges were available in previous releases of PowerMill, they were only accessible using typed commands. The release of PowerMill 2022 sees these options being added to the toolpath settings form - making them even easier to find and use. The image below shows the previous example toolpath re-calculated with suitable projection range values. Note the over-machining has been removed.

Staggered Start Points
The final major highlight we'll include here relates to a new feature to allow start points on toolpaths to be staggered. This feature (which only applies to closed toolpath segments) automatically moves the start position of toolpath segments to improve machine motion, resulting in a better surface finish.
In this example, Autodesk are using Swarf Finishing to machine the tapered sidewall of a part with the side of the cutting tool. Note that, by default, the toolpath start/endpoints are all aligned vertically (highlighted by the dotted red line). When this program is run on the machine the cutting tool will have to slow down at the end of one of the passes. It will then change direction to lead out of the material, move over to start the next lead-in move, before engaging into stock and continuing to machine the part. This movement is likely to leave a dwell mark on the component - partly due to the changing cutting forces but also the risk of one or more machine axes having to reverse direction.

It is possible to minimize the possible dwell mark by using arc lead-in/out moves. However, by staggering the toolpath start points, it is possible to do an even better job. Staggering the points creates additional space between the end of one toolpath segment and the beginning of the next. This additional space helps maintain the forward motion of the machine tool, removing the need for the machine to reverse direction. This can have a positive impact on surface finish and machining cycle time - as the machine doesn't have to slow down and speed up again.
If we apply staggered start points to our previous example, we can see a subtle but important change. The connection moves are staggered relative to each other (highlighted with a red line).

The use of staggered start points has an additional impact as each toolpath segment will, effectively, clean up any witness line left by the preceding pass - further improving surface finish.
So that's it. The top 6 improvements in PowerMill 2022
What's New in PowerMill 2022 | Autodesk Virtual Academy
Autodeskhelps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.
Product:Autodesk PowerMill
Version:2022.0.3 Ultimate *
Supported Architectures:x64
Website Home Page :www.autodesk.com
Languages Supported:multilanguage
System Requirements:PC **
Size:1.9 Gb
Autodesk PowerMill Ultimate 2022.0 with Update 3
Autodesk PowerMill Ultimate 2022.0.3 Update only


Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me


https://hot4share.com/e8ti27aj9yod/mq68f.AutodeskPowermill2022.0.3full.part1.rar.html
https://hot4share.com/u93rcplonfff/mq68f.AutodeskPowermill2022.0.3full.part2.rar.html
https://hot4share.com/6ylmw4evp0qg/mq68f.AutodeskPowermill2022.0.3full.part3.rar.html
https://hot4share.com/q40ovvnuv9eo/mq68f.AutodeskPowermill2022.0.3full.part4.rar.html
https://hot4share.com/z9mamsfs6gkv/mq68f.AutodeskPowermill2022.0.3full.part5.rar.html
https://hot4share.com/hxdmqlqy7juo/mq68f.AutodeskPowermill2022.0.3updateonly.rar.html
++++++++++++++++++++++++++
https://ddownload.com/ddrhe1590sk8/mq68f.AutodeskPowermill2022.0.3full.part1.rar
https://ddownload.com/77d69eaz866n/mq68f.AutodeskPowermill2022.0.3full.part2.rar
https://ddownload.com/tudnmglvu7dq/mq68f.AutodeskPowermill2022.0.3full.part3.rar
https://ddownload.com/hajsm8h52ckh/mq68f.AutodeskPowermill2022.0.3full.part4.rar
https://ddownload.com/3qoaj0nngf81/mq68f.AutodeskPowermill2022.0.3full.part5.rar
https://ddownload.com/7a31d4fbe53f/mq68f.AutodeskPowermill2022.0.3updateonly.rar

https://uploadgig.com/file/download/64092668b50eb0cb/mq68f.AutodeskPowermill2022.0.3full.part1.rar
https://uploadgig.com/file/download/Bb5d4b41c44d6c11/mq68f.AutodeskPowermill2022.0.3full.part2.rar
https://uploadgig.com/file/download/4485889faf6714aD/mq68f.AutodeskPowermill2022.0.3full.part3.rar
https://uploadgig.com/file/download/670485f804538Ef9/mq68f.AutodeskPowermill2022.0.3full.part4.rar
https://uploadgig.com/file/download/0057e70331adAF22/mq68f.AutodeskPowermill2022.0.3full.part5.rar
https://uploadgig.com/file/download/10494Ca2A96284fd/mq68f.AutodeskPowermill2022.0.3updateonly.rar

https://rapidgator.net/file/3d5dbb5c71f9a6c37bd4db8707848d1c/mq68f.AutodeskPowermill2022.0.3full.part1.rar.html
https://rapidgator.net/file/5591774b61b5fd6cfe2c3a31f931f0b4/mq68f.AutodeskPowermill2022.0.3full.part2.rar.html
https://rapidgator.net/file/af3ee163a1959156076e53d49fce8271/mq68f.AutodeskPowermill2022.0.3full.part3.rar.html
https://rapidgator.net/file/c20a959daa40e1551e2a7f9c4ecbb801/mq68f.AutodeskPowermill2022.0.3full.part4.rar.html
https://rapidgator.net/file/6f2984c835dacff471ff12cb87101f6d/mq68f.AutodeskPowermill2022.0.3full.part5.rar.html
https://rapidgator.net/file/ac8095eeef6b589a237d03d6ed02f666/mq68f.AutodeskPowermill2022.0.3updateonly.rar.html




Home        |        Register        |        Forums        |        RSS        |        Rules        |        DMCA Policy        |        Contact Us
DISCLAIMER
None of the files shown here are hosted or transmitted by this server. The links are provided solely by this site's users. The administrator of this site (dl4all.ws) cannot be held responsible for what its users post, or any other actions of its users. You may not use this site to distribute or download any material when you do not have the legal rights to do so. It is your own responsibility to adhere to these terms.

Copyright © 2018 Dl4All. All rights reserved.