Starus RAID Restore 3.2 Multilingual

Free Download Starus RAID Restore 3.2 Multilingual | 40.4 Mb
Starus RAID Restore is designed to help users work efficiently with the capabilities described below. Starus RAID Restore provides tools for its intended workflow. Data stored on a broken NAS unit or RAID array with a failed controller can be difficult to recover - but not if you use RS RAID Retrieve! The tool can automatically repair many types of RAID arrays, allowing to recover files and folders from multi-disk volumes without the original RAID controller. Whether your disks were installed in a NAS unit, in a computer with a hardware RAID controller, or managed with mdadm in a Linux box, RS RAID Retrieve can reassemble and repair the storage spaces and recover your files and folders in just a few clicks. Retrieves Data from Degraded RAID Arrays

Software Overview

Key Features

• 
  
• RS RAID Retrieve prioritizes your data against anything else. While out-of-the-box NAS devices will try to repair the degraded array, often causing yet another disk to fail, RS RAID Retrieve will try to recover your data instead. No lengthy RAID rebuilds and no resilvering, just straight off data recovery.
  
• Recover Data from Corrupted Volumes
  
• Storage space corruption is just as likely as a RAID failure. A perfectly healthy multi-disk array may hold a corrupted logical volume. RS RAID Retrieve can automatically repair corrupted volumes spanned across multiple disks, repairing partition tables and file system structures if necessary to allow you safely extracting the original files and folders.
  
• There are more NAS devices than personal computers with multiple disk arrays, and RS RAID Retrieve certainly takes that fact into account. If your hard drives were used in a NAS box manufactured by Synology, QNAP, ASUSTOR, Western Digital, Thecus, TerraMaster, Buffalo or one of the other popular makers, RS RAID Retrieve can automatically detect, reassemble and repair the storage spaces, mount logical disk volumes and recover your data. Simply attach the hard drives directly to your computer and let RS RAID Retrieve do its job!
  
• Fault Tolerance and Beyond
  
• Several types of multi-disk arrays use striping and checksums to ensure data integrity even if a certain number of disks fail. A RAID 5 array can tolerate a single disk failure without losing a bit of your data. A RAID 6 can lose up to two disks and still hold all the data intact. RS RAID Retrieve will mount degraded RAID arrays and recover the files and folders.
  
• But what if the number of failed hard drives exceeds the fault tolerance threshold? If this happens, your NAS or RAID controller will fail to mount the storage space, effectively locking you out. RS RAID Retrieve will perform complex math to attempt partial data recovery from such arrays. How much is recoverable and whether the recovery is at all possible will depend on the original RAID configuration, the number of failed hard drives and several other parameters such as stipe size.
  
• A single bad block may throw an otherwise healthy hard drive out of the array, causing subsequent rebuild attempts to fail. RS RAID Retrieve is designed to work around bad blocks graciously, recovering everything that's still recoverable and only skipping the bits in the bad blocks.
  

Why Choose Starus RAID Restore?

System Requirements

• 
  
• Operating System: supports Microsoft Windows XP, 2003, Vista, and 2008 Server, Windows 7-8 and Windows 10, 11
  

Home Page

https://www.starusrecovery.com/

Product Information

• 
  
• Software: Starus RAID Restore
  
• Version: 3.2
  
• Language: Multilingual
  
• License: Full Version
  
• ✅File Size: 40.4 Mb
  

Rapidgator
5ubv8.Starus.RAID.Restore.3.2.Multilingual.rar.html
DDownload
5ubv8.Starus.RAID.Restore.3.2.Multilingual.rar

FreeDL
5ubv8.Starus.RAID.Restore.3.2.Multilingual.rar.html