Published 7/2022 MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz Language: English | Size: 1.59 GB | Duration: 3h 35m Generator Dynamics, Synchronism of Generators, Direct and Quadrature Axis Model, Swing Equation, Equal Area Criterion
What you'll learn Fundamentals of Generator Dynamics Fundamentals of Transient Stability Analysis Single and Two Generator Transients Fundamentals and ETAP Examples Synchronism Between Two Generating Sources Synchronous Generator Direct (D) and Quadrature (Q) Axis Model Synchronous Generator Sub-transient, Transient and Steady-state Model Derivation of Swing Equation for Generator Derivation of Inertia Constant (H) From Moment of Inertia (J) Deriving Rotor Angle From Swing Equation Derivation of Small Disturbance Stability Equation OR Synchronizing Power Derivation of Simple Harmonic Motion (SHM) Equation Small Disturbance Stability of Single Machine Infinite Bus (SMIB) System Large Disturbance Stability or Equal Area Criterion Requirements Electrical Engineering No Prior Knowledge Description "Want To Become Expert In ETAP Software and Power System Stability and Transient Analysis?" This course will help you to achieve your goals to become ETAP and Power System Expert.Welcome to the course " Electrical Power System Stability – Beginner to Advance Level Course"The purpose of this course is to learn power system modeling & power system stability analysis using ETAP software which will cover a range of ETAP functionalities used to design & solve various power system practical problems.The course begins with fundamentals of generator dynamics and transient stability analysis, synchronism of generating sources, synchronous generator direct (d) and quadrature (q) axis model as well as sub-transient, transient and steady-state model, swing equation, small and large disturbance stability, equal area criterion etc. The course also covers the simulation of transient stability analysis using ETAP software. The user will be able to create a single line diagram, data entry, and quickly expand the knowledge to automatically perform multiple 'what if' studies using multiple scenarios. The topics are explained with theoretical aspects as well as hand calculations so that it becomes more easier to the attendees to understand the concepts.Below major topics are covered in this course:Fundamentals of Generator DynamicsFundamentals of Transient Stability AnalysisSingle and Two Generator Transients Fundamentals and ETAP ExamplesSynchronism Between Two Generating SourcesSynchronous Generator Direct (D) and Quadrature (Q) Axis ModelSynchronous Generator Sub-transient, Transient and Steady-state ModelDerivation of Swing Equation for GeneratorDerivation of Inertia Constant (H) From Moment of Inertia (J)Deriving Rotor Angle From Swing EquationDerivation of Small Disturbance Stability Equation OR Synchronizing PowerDerivation of Simple Harmonic Motion (SHM) EquationSmall Disturbance Stability of Single Machine Infinite Bus (SMIB) SystemLarge Disturbance Stability or Equal Area CriterionBenefits of attending this course:Course is published using ETAP 20.5Topics are supported with theoretical explanation Downloadable course material and Hand Calculations Overview Section 1: Introduction To Power System Stability Lecture 1 Introduction To Power System Stability Section 2: Generator Dynamics and Transients Fundamentals Lecture 2 Generator Dynamics and Transients Fundamentals Section 3: Generator Dynamics Fundamentals and ETAP Example Lecture 3 Generator Dynamics_Load Addition_Fundamentals Lecture 4 Generator Dynamics_Load Addition_ETAP Example Lecture 5 Generator Dynamics_Load Rejection_Fundamentals Lecture 6 Generator Dynamics_Load Rejection_ETAP Example Lecture 7 Generator Dynamics_Phase Fault_Fundamentals Lecture 8 Generator Dynamics_Phase Fault_ETAP Example Section 4: Multiple OR Parallel Generator Dynamics Fundamentals and ETAP Example Lecture 9 Multiple OR Parallel Generator Dynamics Fundamentals_Part-1 Lecture 10 Multiple OR Parallel Generator Dynamics Fundamentals_Part-2 Lecture 11 Multiple OR Parallel Generator Dynamics Fundamentals_Part-3 Lecture 12 Need for Synchronism Between Generating Sources Lecture 13 Two Generator Dynamics_ETAP Example-1 Lecture 14 Two Generator Dynamics_Under Frequency Load Shedding_ETAP Example-2 Section 5: Synchronous Generator Direct (d) and Quadrature (q) Axis Impedance Model Lecture 15 Synchronous Generator Direct (d) and Quadrature (q) Axis Impedance Model Lecture 16 Synchronous Generator-Subtransient-Transient-Steadystate_d & q Axis Model Section 6: Swing Equation For Generators Lecture 17 Derivation of Swing Equation For Generators Section 7: Derivation of Inertia Constant (H) From Moment of Inertia (J) Lecture 18 Derivation of Inertia Constant (H) From Moment of Inertia (J) Section 8: Deriving Generator Rotor Angle From Swing Equation Lecture 19 Deriving Generator Rotor Angle From Swing Equation Section 9: Small Disturbance Stability OR Synchronizing Power Lecture 20 Small Disturbance Stability OR Synchronizing Power Equation Lecture 21 Simple Harmonic Motion (SHM) Equation Lecture 22 Small Disturbance Stability of Single Machine Infinite Bus (SMIB) System Section 10: Large Distrubance Stability OR Equal Area Criterion Lecture 23 Large Disturbance Stability OR Equal Area Criterion Beginners Who Are New To ETAP Software,Students Preparing Their Projects/Thesis,Graduate Electrical Engineers For Cracking The Interviews,Professionals Working For Companies & Needs To Execute Power System Study Projects,Project Engineers,Electrical Technicians,Project Managers,Electrical Operators