Drone Development from Concept to Flight Design, assemble, and discover the applications of unmanned aerial vehicles

Unlock opportunities in the growing UAV market where drones are revolutionizing diverse sectors like agriculture, surveying, and the military. This book walks you through the complete drone development life cycle, from concept to pilot stage, prototyping, and ultimately, a market-ready product, with domain-specific applications.
Starting with an introduction to unmanned systems, principles of drone flight, and it's motion in 3D space, this book shows you how to design a propulsion system tailored to your drone's needs. You'll then get hands on with the entire drone assembly process, covering airframe, components, and wiring. Next, you'll enhance drone connectivity and navigation with communication devices, such as RFD900, Herelink, and H-16 Pro GCS and hardware protocols like I2C, and UART. The book also guides you in using the open-source flight software Ardupilot and PX4, along with firmware architecture and PID tuning for advanced control. Additionally, you'll go learn about AeroGCS, Mission Planner, and UGCS ground control stations, tips for maiden flight and log analysis for optimizing performance while building a custom survey drone with a 60-min endurance, 10km range, live video feed, and photography options.
By the end of this book, you'll be equipped with all you need to build and fly your own drones and UAVs.What you will learnExplore the design principles for multicopter flight and its physics of motionGrasp terminologies associated with UAV flight systemsGain an in-depth understanding of power trail, communication, and propulsion of a droneStudy IMUs and sensors in flight controllers, and protocols like I2C, SPI, and MAvlinkFamiliarize yourself with open-source drone flight stacks and ground control station softwareUnderstand the control law used in multicopter and the basics of PIDsDelve into modes of flying with remote controllers and analysis of flight logsWho this book is for
This book is for beginner-level drone engineers, robotics engineers, hardware and design engineers, and hobbyists who want to enter the drone industry and enhance their knowledge of the physics, mechanics, avionics, and programming of drones, multicopters, and UAVs. A basic understanding of circuits, assembly, microcontrollers, and electronic instruments like multimeter and batteries, along with fundamental concepts in physics and mathematics, will be helpful for reading this book.Table of ContentsGetting Started with UAV and Drone EngineeringUnderstanding Flight Terminologies and Physics of MotionLearning and Applying Basic Command and Control InterfacesKnowing UAV Systems, Sub-Systems and ComponentsSensors and IMUs with Their Application in DronesIntroduction to Drone Firmware and Flight StacksIntroduction to Ground Control Station SoftwareUnderstanding Flight Modes and Mission PlanningDrone Assembly, Configuration, and TuningFlight Logs Analysis and PIDsApplication-Based Drone DevelopmentDevelopment of Custom Survey Drone


Drone Development from Concept to Flight Design, assemble, and discover the applications of unmanned aerial vehicles Fast Download
Drone Development from Concept to Flight Design, assemble, and discover the applications of unmanned aerial vehicles Full Download