:
Free Download Gowin EDA (FPGA Designer) 1.9.12.04 | 1.8 Gb
Gowin EDA (FPGA Designer) is an integrated development environment designed specifically for Gowin FPGA devices. It provides a unified workflow for hardware design, synthesis, implementation, bitstream generation, device programming, and on-board debugging.
The software combines design entry, RTL synthesis, place and route, optimization, and FPGA configuration within a graphical environment. It is intended for engineers developing programmable logic solutions with Gowin FPGA devices.
Gowin EDA (FPGA Designer) also includes support for a range of Gowin IP cores and development functions, allowing designers to incorporate hardware interfaces and processing components into FPGA projects.
Software Overview
Gowin EDA is the integrated design system for Gowin FPGA devices, covering the development process from RTL description through FPGA bitstream generation. Its workflow combines design optimization, synthesis, automatic implementation, graphical interaction, device download, and online debugging.
The environment is designed to support Gowin's low-power and cost-oriented FPGA architecture and provides the tools required to develop and implement FPGA-based designs.
Key Features
- Integrated FPGA development environment covering design entry through device programming and debugging
- RTL synthesis and design optimization for Gowin FPGA devices
- Automatic place and route and bitstream generation
- Graphical interface for FPGA design implementation
- Support for Gowin IP cores and hardware interface components
- USB 3.2 PHY support for 20 Gbps, 10 Gbps, and 5 Gbps operation
- GMT hard-core support including matrix transposition
- RNG hard-core support for random number generation
- UBM hard-core support for arbitrary bit mapping
- PCIe SGDMA interrupt mode support
- USB Device Controller enhancements for High Speed and Full Speed control
- DDR3 Memory Interface improvements for simulation consistency
- USB3.1 PHY descrambling correction for full-bandwidth transmission
Why Choose Gowin EDA (FPGA Designer)
Gowin EDA provides a centralized environment for engineers working with Gowin FPGA devices. Instead of using separate tools for major implementation stages, designers can manage RTL entry, synthesis, implementation, bitstream creation, programming, and debugging through an integrated workflow.
Its IP-oriented development model also provides access to specialized components for interfaces, memory, processing, and control functions, making it suitable for a variety of programmable logic development projects.
What's New
The 1.9.12.04 release includes new IP support, functional enhancements, and fixes across the Gowin software environment.
IP Release Notes
- USB 3.2 PHY (V1.0): Added support for USB 3.2 PHY operation at 20 Gbps, 10 Gbps, and 5 Gbps.
- GMT (V1.0): Added support for the GMT hard core, including matrix transposition.
- RNG (V1.0): Added support for the RNG hard core for random number generation.
- UBM (V1.0): Added support for the UBM hard core for arbitrary bit mapping.
- PCIe SGDMA (V1.1): Added interrupt mode support.
- CSC (V1.3): Added support for GW3A devices.
- EasyCDR (V1.5): Added support for GW3A devices.
- USB Device Controller (V3.4): Added a High Speed manual enable control option and interface for switching between High Speed and Full Speed modes through logic control. The option is disabled by default and is intended primarily for UAC audio applications.
- USB Device Controller (V3.4): Added endpoint valid information to the debug interface and an option for configuring device descriptor interface timing so descriptors can be stored in external RAM.
- PDM2PCM (V1.7): Updated the IP core to correct an error involving data output amplitude truncation.
- DDR3 Memory Interface (V6.1): Fixed an issue that could cause differences between VO and RTL simulation results when the memory clock frequency exceeded 400 MHz.
- PWM (V1.1): Changed the Cycle Width GUI parameter range from 2-32 to 4-32.
- USB3.1 PHY (V1.2): Fixed a descrambling error between two consecutive SKPs during full-bandwidth transmission.
System Requirements
Supported Architectures: x64
Operating Systems: Windows & Linux *
Frequently Asked Questions
What is Gowin EDA used for?
Gowin EDA is used to design, synthesize, implement, program, and debug projects targeting Gowin FPGA devices.
Does Gowin EDA support FPGA IP cores?
Yes. The software includes support for Gowin IP cores, including components for USB, PCIe, memory, clocking, processing, and other hardware functions.
What type of design workflow does Gowin EDA provide?
The environment covers the workflow from RTL design entry and synthesis through place and route, bitstream generation, device download, and online debugging.
Which operating systems are supported?
The supplied system requirements specify Windows and Linux on x64 architecture.
Home Page
http://www.gowinsemi.com.cn/
Product Information
- Software Name: Gowin EDA (FPGA Designer)
- Version: 1.9.12.04
- Architecture: x64
- Languages: English
- License type: Full Version
- File Size: 1.8 Gb
Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me
Rapidgator
987o2.GowinV1.9.12.04linux.tar.rar.html
987o2.GowinV1.9.12.04x64win.rar.html
UploadCloud
987o2.GowinV1.9.12.04linux.tar.rar.html
987o2.GowinV1.9.12.04x64win.rar.html
DDownload
987o2.GowinV1.9.12.04linux.tar.rar
987o2.GowinV1.9.12.04x64win.rar
FreeDL
987o2.GowinV1.9.12.04linux.tar.rar.html
987o2.GowinV1.9.12.04x64win.rar.html
Links are Interchangeable - No Password - Single Extraction