EPLAN Harness proD 2.9 (x64)

What's New in EPLAN Harness proD 2.9

Accessories
Accessories are now fully supported in Harness proD and are completely compatible with the EPLAN Platform and project exchange. All accessories of a part are now exported and imported along with the part. The EPLAN import panel now displays pins and has an option for placing accessories graphically or non-graphically. New tables are available in nailboards and cable drawings for listing the accessories of a specific part and of all parts. Lastly, a new report type Accessory report has been added.

Path Interpolation
Users can now choose between two different styles of interpolation for wires, cables, bundles, twists and surface protections in the workspace as well as the workdesk. These can be set in the command bar during placement, or in the properties bar for objects already placed. With interpolation set to spline, the object will pass through control points. If the interpolation is set to rounded corners, a bending radius can be set. The object then follows a straight-line path between two control points, and bends with the given radius around any middle control points.

Twists
A new object type "Twist" is available in Studio. Twists function similarly to bundles, in that other wires, cables, bundles, etc. can be routed through them. However, twists have a new property "Twist factor", which determines how much the twist increases the content's length. For example, 15 cm of wire can fit into just 10 cm of twist with a twist factor of 1.5. Twists must contain at least two objects to be valid. A new task has been added to check for invalid twists.

New Part Categories
Three part categories are new in Harness proD: Sensors, Switches and Pushbuttons, Relays and Contactors, and Signal Devices. They are fully supported in Library, Studio and in exchange with the EPLAN Platform.

New Languages
Harness proD is now available in three new languages: Spanish, Korean and Turkish.

Workspace, Workdesk templates
Templates can now be created for workspaces and workdesks. These store data about the document's settings, translation editor's settings, and optionally user-defined properties.

Text alignment
Texts can now be aligned to the left, center, and right. This alignment is fully compatible with exports and imports.

Replacing Ribbon Cables
The last library part category which could not be replaced in Studio, the ribbon cables, can now be replaced. This means they can also be updated to the latest Library versions with the Update parts from Library function.

Formula Editor
The Formula editor is now also available for text fields in Studio. Additionally, a new node in the settings for the workspace and the workdesk called Tree view item name templates allows users to use the Formula editor to customize tree view item names according to a formula.

Navigation Cube
An interactive navigation cube can be displayed in the workspace for easier manipulation of the 3D environment.

Cable End Point Offset
Cables placed automatically by the EPLAN import panel are placed with a user-defined distance from connectable objects.

Constraint Preservation
Constraints are now preserved during replacement and the Update parts from Library function.

And various other small improvements and bug fixes.

EPLAN Harness proDis a unique stand-alone easy-to-use solution, which enables you to create 3D wire harnesses, 2D nailboards, cable drawings, and reports efficiently and fast. Based on the newest technology, EPLAN Harness proD gives you the confidence to work with an up-to-date wire harness software technology available on the market. EPLAN Harness proD makes wire harness design independent from the availability of the mechanical prototype. Working directly with the 3D MCAD model significantly reduces the costs of development while saving time and money through a shorter development cycle.

EPLAN Harness proD consists of two main modules: EPLAN Harness proD Library and EPLAN Harness proD Studio.

EPLAN Harness proD Studio is a project environment which consists of 3D workspaces, workdesks, 2D nailboards, cable drawings, and reports. This environment enables you to not only create wire harnesses, but also to include additional documentation in the project like e-mails, PDF files, Excel spreadsheets, Word documents, etc. Studio is furthermore capable of containing multiple variants, workspaces, workdesks, nailboards, cable drawings, and reports and provides total control over all project-related files.

EPLAN Harness ProD Tutorial

EPLANwas founded in 1984 and is part of the owner-operated Friedhelm Loh Group. The Friedhelm Loh Group operates worldwide with 12 production sites and 96 international subsidiaries.

EPLAN provides software and service solutions in the fields of electrical, automation and mechatronic engineering. The company develops one of the world's leading design software solutions for machine and panel builders. EPLAN is also the ideal partner to streamline challenging engineering processes.

Product:EPLAN Harness proD
Version:2.9 SP0 (version 2.9.0.329)
Supported Architectures:x64
Website Home Page :

www.eplan-software.com

Language:multilanguage
System Requirements:PC *
Size:1.0 Gb

EPLAN Harness proD Requirements and Installation
Before installing EPLAN Harness proD on a workstation make sure the hardware and software requirements are met.

Recommended hardware specification
- Physical memory: 16 GB
- Hard disk: SSD with at least 4 GB of free space
- Graphics card: Dedicated graphics card from AMD (ATI) or Nvidia with current Direct 3D 11+ / OpenGL 2+ drivers and 2 GB RAM (comparable to a Nvidia Quadro 600 or higher)
- Processor: Multicore CPU, not older than 3 years

Software requirements
One of the following operating systems:
- Microsoft Windows 7 SP1 (64 Bit) Professional, Enterprise, Ultimate
- Microsoft Windows 8.1 (64 Bit) Pro, Enterprise
- Microsoft Windows 10 (64 Bit) Pro; Enterprise Build 1709
- Microsoft Windows 10 (64 Bit) Pro; Enterprise Build 1803

One of the following servers:
- Microsoft Windows Server 2012 (64 Bit)
- Microsoft Windows Server 2012 R2 (64 Bit)
- Microsoft Windows Server 2016 (64 Bit)
- Terminal Server with Citrix XenApp 7.15 and Citrix Desktop 7.15

All of the following runtime environment software:
- Microsoft DirectX 9.0c
- Microsoft .NET 4.5.2
- Microsoft Visual C++ 2010 SP1 Redistributable Package
- Microsoft Visual C++ 2013 Redistributable Package
- Microsoft Visual C++ 2015 Redistributable Package

Note:EPLAN Harness proD Autorun should detect and install any missing runtime environment software.


EPLAN Harness proD 2.9 (x64) Fast Download
EPLAN Harness proD 2.9 (x64) Full Download