Siemens NX 2306 Build 3000 (NX 2306 Series)

NX 2306 Series Release Notes 2306.3000

Release,PR Number,Description,Application,Function,Sub_Function
2306.3,8440926,FUSION Error reported in log file when running KF applications,KDA,KNOW_FUSION,LANGUAGE
2306.3,8624312,Multitools are not reliably transferred to TC under NX2206 and TC12,CAM,TC_MFG,OTHER
2306.3,8644269,IMM 14.1 unexpectedly checks out nx_coatings license,KDA,COATINGS,IMM_INTEG
2306.3,8656896,Drag & Drop of end form doesn't work when stock part is the work part,ROUTING_MECH,TOOLS,END_FORMS
2306.3,8658236,Nodal force report arrows not aligned properly,CAE,ADV_SIMULATION,POST_OTHER
2306.3,10319197,"allcatpart, no geometrical Properties like COG, Volume,",TRANSLATORS,CATIAV5_TRANS,ALL
2306.3,10392166,Error 'Symbol not found' written to syslog again when executing KF applications,KDA,KNOW_FUSION,LANGUAGE
2306.3,10393596,ER: NX Diagramming Assign custom attributes to a Connection,KDA,NX_DIAGRAMMING,DESIGN
2306.3,10500757,Documentation: license required for NX CMM Teamcenter Integration.,CMM_INSPECTION,TC_INTEGRATION,ALL
2306.3,10539945,Cannot export to format IFC for some assemblies,TRANSLATOR,IFC,EXPORT
2306.3,10598164,Ansys RST import of cyclic symmetry model is not correct.,CAE,ADV_SIMULATION,POST_RESULT
2306.3,10630964,3D Adaptive Roughing operation creates tapered wall,CAM,ADAPTIVE_MILL,ALL
2306.3,10634688,NX11AbaqusNX2212,CAE,ADV_SIMULATION,ABAQUS_EXPORT
2306.3,10635645,IFC Export from NX/ Teamcenter Integration,TRANSLATOR,IFC,EXPORT
2306.3,10635789,Unable to attribute derived routing path [RSD] [Cableway Toolbox],RSD_GENERAL,PATH,DERIVED_PATH
2306.3,10637482,Analisi statica ANSYS con simmetria ciclica,CAE,ADV_SIMULATION,POST_RESULT
2306.3,10640214,Reimporting of FEM into Siemens and Change in Modal Results,CAE,ADV_SIMULATION,FILE_OPERATIONS
2306.3,10642162,Ship Structure Manufacturing: Plate Preparation inaccurate results,SHIP_DESIGN,MANUFACTURING,PLATE_PREP
2306.3,10647256,Beam orientations lost when used in an assembly fem,CAE,ADV_SIMULATION,AFEM
2306.3,10651525,Expressions and check in template explorer does not disappear and not restored t,KDA,KNOW_FUSION,PTS
2306.3,10655098,routing path not created as expected,ROUTING_GENERAL,PATH,SPLINE_PATH
2306.3,10663911,Export Motion > Team center Visualization . Does not writes vfm file,CAE,MOTION,EXPORT_TCV
2306.3,10665343,Routing Ports lose slope (alignment),ROUTING_GENERAL,PART,QUALIFY_PART
2306.3,10666517,NX Diagramming - A Branch/Connection Removed from a Run still reflects in Active,KDA,NX_DIAGRAMMING,TC_INTEGRATION
2306.3,10681220,Mapped Attributes in Members have no value in consolidated assembly structure,STRUCTURE_DES,DESIGN,CONSOLIDATE
2306.3,10693014,Center of mass symbol which is created by the Measure feature changes position,DESIGN,INFO_ANALYSIS,MEASURE
2306.3,10695940,Wrong mom_head_gauge_point/mom_head_spindle_axis if Head is not mounted to Spind,CAM,POSTCONFIG,ALL
2306.3,10700319,Unresolved HVAC-FTS parameters allow change dimensions without the geometry,RSD_GENERAL,PART,TEMPLATE_PARMS
2306.3,10700740,Preview of plate creation is not showing the correct plate,STRUCTURE_DES,DESIGN,PLATE
2306.3,10700759,Load performance decreasing from ug_excel_xxxx KF calls and Excel Recovery,DESIGN,EXPRESSION,FUNCTION_BUILDR
2306.3,10702170,Run navigator for HVAC discipline is not active when HVAC is only selected,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2306.3,10702825,Length of outlet connection is not right,RSD_MECHANICAL,PATH,HEADER_OUTLET
2306.3,10702847,Connection attributes not visible in Connection Properties window in RSD,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2306.3,10703169,"During Auto Packing or NX Open, NX uses up the entire 32gb of Ram causing the ap",ADD_FIXED_PLANE,NESTING,OTHER
2306.3,10703972,NX11AbaqusfemNX2011,CAE,ADV_SIMULATION,FIELDS
2306.3,10704324,Wrong mom_head_gauge_point/mom_head_spindle_axis if Head is not mounted to Spind,CAM,POSTCONFIG,ALL
2306.3,10704593,Fullfilment allows to assign generic symbol on 2D as the correct equipment on 3D,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2306.3,10704707,Missing longitudinal bulkheads in section drawing,SHIP_DESIGN,DRAFTING,SHIP_SECTN_DRWG
2306.3,10705041,NX 2D Edit German: There are no templates available to support this operation,2D_EDIT,2D_EDIT_APP,UNDETERMINED
2306.3,10706724,"When you configure ""Off Sheet Connector"" tag in customer file it doesn't update",KDA,NX_DIAGRAMMING,USER_INTERFACE
2306.3,10706812,Fulfillment status for direct connection between equipment,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2306.3,10707242,Automated ship mesh shows stiffeners with wrong orientation,SHIP_DESIGN,TOOLS,CAE_PREPARATION
2306.3,10708857,There is no prevention to create a new stock in a release assembly,RSD_MECHANICAL,STOCK,END_FORMS
2306.3,10708940,"Off Sheet Connector labels, when it is released, loses label info",KDA,NX_DIAGRAMMING,DESIGN
2306.3,10711447,Poor Performance with Component Selection Filter,ANIMATION_DES,ANIMAT_EFFECT,AUTO_EXPLODE
2306.3,10714051,Stock port based welding not working in NX2206,KDA,WELD_ASSISTANT,WELDING_JOINT
2306.3,10715362,PDF with rendering relation attached to action button not opening,KDA,KNOW_FUSION,PTS
2306.3,10721240,"Product Template Author adds quotes ("") to String expression in dialog",KDA,KNOW_FUSION,PTS
2306.3,10721357,Mapped Attributes in consolidated Members have no value,STRUCTURE_DES,DESIGN,CONSOLIDATE
2306.3,10725430,Simcenter 3D motion solver error & bodies has zero weight mass for 3D contact,CAE,MOTION,CONTACT
2306.3,10725617,PTS Edit Reusable Component terminates NX with Fatal Error,KDA,KNOW_FUSION,PTS
2306.3,10726936,Initial condition in Simcenter Motion.,CAE,MOTION,SOLUTION
2306.3,10726944,Motion Body 3D Contact Defining Error,CAE,MOTION,CONTACT
2306.3,10728796,Files could not be loaded - similar to PR10646085 & 10682212,CAM,WIRE_EDM,OTHER
2306.3,10733483,NX Diagramming HVAC discipline junctions are not working,KDA,NX_DIAGRAMMING,DESIGN
2306.3,10733659,"Detach, Save and Reattach Connection to same Equipment",KDA,NX_DIAGRAMMING,DESIGN
2306.3,10734657,"Unable to load NX file, 'Corrupt data found when loading an OM file'",DRAFTING,SYMBOL,USER_DEF_SYMBOL
2306.3,10735689,Associativity issue after part geometry update for 3D partial model,CAE,ADV_SIMULATION,UPDATE_FEM
2306.3,10740090,Cant open sim file after saving as SC3D NV Solver / Noise and Vibrationsim,CAE,ADV_SIMULATION,BOUNDARY_COND
2306.3,10747045,"""Corrupt data found when loading an OM file"" FIle will not open NX2007 but will",CORRUPTED_PARTS,MODELING,ALL
2306.3,10751190,Driving Side of the Windshield Vision Zones is wrong in NX2007 and higher,KDA,GENERAL_PACKAGE,WS_VISION_ZONES
2306.3,10751223,Driving Side of the Windshield Vision Zones is wrong in NX2007 and above,KDA,GENERAL_PACKAGE,WS_VISION_ZONES
2306.3,10751641,Corrupted File / OM-Error,CORRUPTED_PARTS,MODELING,ALL

NXis a flexible, powerful software that helps deliver better products faster with next-generation design and manufacturing solutions using the digital twin. Siemens is the first CAD/CAM/CAE software company to offer a continuous release model. WithNX Continuous Release, upgrading is fast, automated, and seamless. With each new release of NX, team Siemens Digital Industries Software continuing to innovate, pushing the barriers of what product development systems can do. Being on continuous release gives you access to industry-leading capabilities, helping you to maximize productivity and innovate more quickly than ever before.
What's new in NX 2306 Design
Siemens Digital Industries Softwareis a leading global provider of product life cycle management (PLM) software and services with 7 million licensed seats and 71,000 customers worldwide. Headquartered in Plano, Texas, Siemens Digital Industries Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products.




Siemens NX 2306 Build 3000 (NX 2306 Series) Fast Download
Siemens NX 2306 Build 3000 (NX 2306 Series) Full Download