Udemy - ISP Core Network Setup with MikroTik

What you'll learn:
Be able to build up a core ISP network
Provide internet from the ISP using public IP addresses
Configure Intranet using MPLS/VPLS
Reach any customer router using a management VLAN
Assign bandwidth speed to each customer using Queue Trees
Requirements
Good knowledge of BGP, OSPF, VLAN, MPLS and VPLS
Description
When it comes about MikroTik, a lot of engineers use this product in their ISPs. But the question that may be asked: are you using the whole features that MikroTik is providing to you so you can provide add-on solutions to your customers?
For this reason, I have decided to build up this course and show you how you can build a core network of an ISP using MikroTik routers. I will go through configuring the ISP from scratch as following:
Setting up BGP peers with the uplink ISP
Publishing the public IP subnet, configuring VLAN's between all core routers
Setting up OSPF in the core network
Provide customers which public IP addresses allow them to go to the internet
Providing intranet solution using MPLS/VPLS
Assigning bandwidth speed to each customer
Reaching each customer router using a management VLAN
All those topics will be configured in this course. Please note, I will not explain the theory behind each of those protocols, so I assume that if you are taking this course, you know how all those protocols work.
This course will be only LABS, and I will be using 7 MikroTik routers on GNS3 with CHR image. You can run the same scenario on real MikroTik equipment if you like to.
Finally, I hope that this course can guide you to run a stable core network in your ISP, and I look forward to see you inside.
Who this course is for
Network engineers working in ISPs using MikroTik routers
Entrepreneurs who want to build up an ISP
Homepage

https://www.udemy.com/course/isp-core-network-setup-with-mikrotik/

Udemy - ISP Core Network Setup with MikroTik Fast Download
Udemy - ISP Core Network Setup with MikroTik Full Download