RSlogix PLC5 and SLC500 Training. The Basics

How to program and maintain an RSlogix PLC5 and an SLC500 PLC system

You will learn how to set up a PLC5 and SLC500 from scratch.

The ladder logic programming rules in PLC5 and SLC500.
How to configure physical inputs and outputs on both platforms.
You will learn how to complete and implement a project right through to commissioning.

There are no real pre requisites necessary, but it is advantageous if you are computer literate and familiar with electrical and instrumentation teology.

Due to many requests, I have decided to create a course covering the PLC 5 and SLC 500 PLC systems. The Basics. and it is for any of you who are still using and maintaining these systems even though they have been around for many years now. Some users simply love them and won't change systems unless they really have to.
My name is Jeff Sharman and I shall be your instructor during this training. I have had many years of practical experience in all aspects of PLC's, Instrumentation, and Control Systems as well as training both face to face and Online. I have travelled extensively throughout Africa and the Middle East both in a training and client support capacity.
I have been privileged to meet some of the most amazing people from all over the world. Lots of humourous moments also.
The course will start by giving you a general introduction to all the aspects that will be discussed.
Who Should Take This Course
This course, RSlogix PLC 5 and SLC 500 Training. The Basics is designed for anyone already in the PLC and Instrumentation field, and wishes to learn PLC's right from the early days. Maybe they are being used in your operation even though they have been around a long .
For anyone who just wishes to enhance their knowledge.
Listed below are some of the topics I will cover with you in this course.
Identifying the hardware components in both systems.
Setting up communications.
The software system.
Addressing in both systems.
Programming ladder. The rules.
Programming bit instructions.
Programming rs and counters.
Program flow
This is just a short description of some of the things you will learn in this course. There is a lot more in addition to this.
There are a number of quizzes that you can complete after each section to help you reinforce your knowledge and gain confidence.
Once you finish the course, you will receive a certificate of completion.
The majority of the course consists of video tutorials where I will explain all the different aspects of PLC 5 and SLC 500 Systems and demonstrate how it can be used.
The more you understand, the better you will be,
So if you are really serious about learning, Enroll Today.

Instrument mechanics and technicians, Electrical technicians, Eeering personnel, Trainee personnel in the electrical and instrumentation fields, Software and Networking specialists

RSlogix PLC5 and SLC500 Training. The Basics Fast Download
RSlogix PLC5 and SLC500 Training. The Basics Full Download