Protective Coating Corrosion Control

What you'll learn
introduction about corrosion explain basic corrosion cell followed by coating protection theory though Barrier effect, Inhibitor effect and Galvanic effect
Paint composition (Binder, Pigments, Solvents, Additives)
paint curing and drying mechanism by Oxidatively drying, Physically drying / Solvent Evaporation, Chemically curing, and IR/UV – cured
A paint system is one or more layers of paint, which will give corrosion protection
preparation surface by Dry abrasive blast cleaning, Wet blasting ,Hand and power tool cleaning, Flame cleaning, Pickling (chemical cleaning) andVapor degreasing
Paint application , Quality control and inspection before , during and after application and finally paint failure
Requirements
No program experience needed you will learn what you need
Description
Unprotected steel in the atmosphere, in water and in soil is subject to corrosion that may lead to damage. Therefore, to avoid corrosion damage, steel structures are normally protected to withstand the corrosion stresses during the service life required of the structure. This course deals with protection by paint systems and covers, in the various parts, all features that are important in achieving adequate corrosion protection. Inspectors of protective coatings and manufacturers of coating materials to have at their disposal state-of- the-art information in concise form on corrosion protection by paint systems. Such information has to be as complete as possible, unambiguous and easily understandable to avoid difficulties and misunderstandings between the parties concerned with the practical implementation of protection work.• Our course will start with small introduction about corrosion explain basic corrosion cell followed by coating protection theory though Barrier effect, Inhibitor effect and Galvanic effect.• Paint composition (Binder, Pigments, Solvents, Additives), paint curing and drying mechanism by Oxidatively drying, physically drying / Solvent Evaporation, chemically curing, and IR/UV – cured.• A paint system is one or more layers of paint, which will give corrosion protection• surface preparation by Dry abrasive blast cleaning, Wet blasting, Hand and power tool cleaning, Flame cleaning, Pickling (chemical cleaning), Vapor degreasing, Weathering• Paint application, Quality control and inspection before, during and after application and finally paint failure
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 corrosion introduction
Section 2: corrosion protection by coatings
Lecture 3 corrosion protection by coating
Section 3: paint composition
Lecture 4 paint composition part1
Lecture 5 paint composition part2
Section 4: Drying and curing of paint film
Lecture 6 Drying and curing of paint film
Section 5: paint system
Lecture 7 paint system
Section 6: surface preparation
Lecture 8 surface preparation part1
Lecture 9 surface preparation part2
Section 7: paint application
Lecture 10 paint application
Section 8: Inspection and control
Lecture 11 Inspection and control of paint part1
Lecture 12 Inspection and control of paint part2
Lecture 13 Inspection and control of paint part3
Lecture 14 Inspection and control of paint part4
Section 9: calculation of paint consumption
Lecture 15 calculation of paint consumption
Section 10: Paint failure
Lecture 16 paint failure
Beginner, Engineer, Student, Paint inspectors,mangers, Technicians, Chemical and petroleum industry specialists
Homepage

https://www.udemy.com/course/protective-coating-corrosion-control/

Protective Coating Corrosion Control Fast Download
Protective Coating Corrosion Control Full Download